Home daily repair 8 strokes

If the house has been living for a long time, it is inevitable that there will be some minor problems. If the workers are to be repaired, it seems that they are a little bit motivated. It is better to take time to rest and do it yourself. It has a sense of accomplishment and can relax the tight working conditions on weekdays. !


Repair wall cracks

Use a insert knife to cut along the edge of the crack to remove loose plaster and dust, make the mortar easy to secure, and use a brush to sweep the dust in the crack. Fill the mortar with a mortar into the crack until the crack is completely filled and the excess mortar is scraped off. After the mortar is dried, the surface of the repaired crack is smoothed with sandpaper.


Fix bubbling that appears on the wallpaper

Use a single-edged razor blade or utility knife to cut a small "X" on the wallpaper, then pick up the end of the wallpaper, and if there is an adhesive block underneath, gently scrape it off. If it is caused by air, use a brush to apply a small amount of adhesive to the back of the wallpaper, then press the wallpaper.


Eliminate furniture hot marks

If the hot marks are too deep, wrinkle the towel in warm water, wring it out, add a little ammonia water, rub the towel with the palm of your hand, make the ammonia water fill the palm of your hand, then gently and quickly pat the hot marks with the palm of your hand, and finally apply a layer of wax. This will eliminate hot marks.


Repair cracks in parquet

Look for a crayon that is the same or similar in color to the floor and apply it back and forth over the gap with a crayon until the crayon fills the gap. Use a blade to flatten the excess crayon to ensure that the floor is flat.


Repairing tiles off

First, mix the 107 glue into a little cement to make a paste, and then scrape the mortar adhering to the back of the tile and the surrounding. Apply a thin layer of cement paste evenly to the back of the tile and press it tightly to secure it. If the tile is only partially peeled off, do not force the mortar on the base surface to prevent the original tile from being loose.


Eliminate furniture decorative drum kit

Use a blade to cut in the middle of the drum of the furniture in the direction of the wood grain, and use a syringe to inject the glue into the seam. Gently press the upper part of the drum bag with your fingers, wipe the spilled glue with a damp cloth, and press it with a heavy object with a large smooth surface on the bottom.


Solve the faucet dripping

After closing the water supply, remove the small screws on the back or behind the faucet handle to remove the handle that is attached to the faucet body. Replace the old washer with an identical new washer, secure the new washer to the spool, and install the components in the faucet.


Repairing wooden furniture cracking

Tear the newspaper into pieces, add some alum and water, and cook into a thick paste. The cooled paste is applied to the cracks of the wood and is firm after drying.


Silicon Nitride is currently the most effective material widely used in non-ferrous metal casting temperature measurement and temperature control. The thermocouple protection sleeve made of silicon nitride has the following characteristics: 1. The service life is up to 12 More than 2 months 2. Excellent thermal conductivity makes it respond to temperature very quickly, can measure the temperature of molten metal in 1 minute 3. Strong anti-erosion ability 4. Does not melt under high temperature, no pollution to molten metal 5. Available In alloy solutions containing sodium and antimony components 6. High temperature resistance (maximum temperature up to 1600 degrees) 7. Excellent thermal shock resistance 8. Not easy to slag 9. Low maintenance requirements and easy maintenance 10. The product is an electrical insulator 11. Cost-effective.

Silicon Nitride Ceramic Sleeve

Silicon Nitride Ceramic Disc,Black Silicon Nitride Ceramic Disc,Ceramic Structure Disc,Plate Silicon Nitride Disc